Visuel virus

Novidades esteiras transportadoras e correias termosoldáveis

Covid-19: MAFDEL is committed to ensuring the continuity of your processes

Visuel virus

As the world is facing the Covid-19 pandemic, our priority is to ensure the health and safety of all. We are aware that our products are a critical element for many production processes and our three production sites remain operational. The fabrication of standard and custom products is also operational but lead times may be extended.

The freight system, however, is subject to influences beyond our control. Under these conditions, we encourage you to anticipate your needs as best as you can.

Our sales teams can be reached through normal channels but the situation may be reviewed subject to future influences.

We wish you good health and that any disruption to your business activities may be short-lived and you recover quickly and successfully.


Mafdel member of EHEDG

MAFDEL is now member of the EHEDG (European Hygienic Engineering & Design Group).
The principal goal of EHEDG is the promotion of safe food by improving hygienic engineering and design in all aspects of food manufacture.
We are proud to manufacture our range of positive belts, the ultimate hygienic solution for food industry.

 


Meet Mafdel at Anutec exhibition – International FoodTec India.

From 13th to 15th of September 2019, Mafdel is at Anutec exhibition in partnership with Belting Enterprises.

Bombay Exhibition Centre, Mumbai, Maharashtra 400063.

 


Meet Mafdel at Hannover Messe exhibition – Hall 25 Stand A34.

From 1st to 5th of April 2019, Mafdel is at Hannover Messe exhibition to show your our new range of thermoweldable belts and conveyor belts.

Hall 25 – Stand A34

Hannover Messe – Hermesallee – 30521 Hannover


Visite a Mafdel en la feria IPPE – Stand B7465

Picture of MAFDEL and DERCO USA at IPPE exhibition

Del 12 al 14 de febrero, venga a ver el equipo MAFDEL en la feria IPPE, con nuestro socio DERCO USA, y descubra nuestra gama de correas, bandas monomaterias y bandas de movimiento positivo.
Stand B7465
> Georgia World Congress Center – 285 Andrew Young International Blvd NW – Atlanta, Georgia USA


Construction of a 3600m² production facility.

Nouvelle unité de production

A new 3600m² production facility was built to increase increasing production demands and optimize the development of new products.

 


MAFDEL alia-se ao movimento French Fab.

Mafdel membre de la French Fab

Orgulhoso de fabricar a suas correias na França, MAFDEL faz parte do movimento French Fab que valoriza o know-how industrial e o Made in France para o internacional.

 


Apresentação das nossas esteiras transportadoras na feira Foodtec Índia Internacional (Bombay. Índia)

Logo du salon International Food-Tec India

A nossa gama de esteiras transportadoras foi apresentada na feira Foodtec Índia Internacional em Bombay de 27 a 29 de setembro 2018.

 


New documentation on retaining clips.

Retaining clip picture

The retaining clips lock the sprockets, wheels and discs to prevent lateral movement on a 40x40mm square shaft.
See our documentation and contact us for more information.

 


Presentation of DEL/DRIVE and POSITIVEBELT positive drive belts at the NIBA convention.

NIBA logo
DEL/DRIVE and POSITIVEBELT Positive Drive Tapes were presented at the United States Conveyor Belt Manufacturers and Distributors (NIBA) Annual Convention from September 12 to 15, 2018.

 


As correias de tração positiva DEL/DRIVE e as correias lisas até 1 850 mm de largo.


As correias de tração positiva DEL/DRIVE e as correias lisas até 1 850 mm de largo.
Para satisfazermos as necessidades dos industriais e dos distribuidores, as correias de tração positiva DEL/DRIVE (exceto a DEL/DRIVE 50/25) e as correias lisas estão doravante disponíveis em largura 1 850 mm.

 


Discover Mafdel’s products at Hannover Messe exhibition – Hall 22 Stand B31

Mafdel team at Hannover Messe 2018

From 23rd to 27th of April, Mafdel is at Hannover Messe to show you our range of thermoweldable belts and conveyor belts.

Hall 22 Stand B31

> Hannover Messe – Hermesallee – 30521 Hannover

 


Meet Mafdel at Hannover Messe exhibition – Hall 25 Stand G19

Meet Mafdel at Hannover Messe exhibition

Meet Mafdel at Hannover Messe exhibition, from 24th to 28th of April and discover our range of thermoweldable belts and conveyor belts.

Hall 25 Stand G19

>> Hannover Messe – Hermesallee – 30521 Hannover

 


Meet Mafdel at Pro2Pac exhibition London – Stand N652


Until 22nd of march, meet Mafdel at Pro2Pac exhibition with our partner GB Belting, and discover our range of extruded belts, monomaterial belts and positively driven conveyor belts.
Stand N652

>> Pro2Pac and Waste-Works – ExCeL London
1 Western Gateway, Royal Victoria Dock, London Docklands, E16 1XL

 


DEL/DRIVE 50-25 – The new positively driven dual drive conveyor belt

DEL/DRIVE 50-25 picture

The new positively driven DEL/DRIVE 50-25 conveyor belt has a pitch of 50mm on one side, and 25mm on the other.
It can be run in two configurations:

– DEL/DRIVE 50 conveyor belt equipped with cleats pitch of 25mm
– DEL/DRIVE 25 conveyor belt equipped with cleats pitch of 50mm

>> Please refer to the DEL/DRIVE 50-25 leaflet for further details.


DEL/DRIVE 25 – The positively driven 25mm pitch conveyor belt with a maximum width of 1200 mm

DEL/DRIVE 25 picture

The positively driven DEL/DRIVE 25 conveyor belt is now available in a wider 1200mm width.

Compliant with the strictest hygiene standards, it is capable of negotiating small pulley diameters, creating small transfer distances and compact drives.

>> Please refer to the DEL/DRIVE 25 (1200mm width) leaflet for further details.


The NEW range of Mafdel joining tools

Nouvelle gamme de fers à souder pour courroies thermosoudables

We are pleased to introduce the new range of welding tools for use with Mafdel extruded round and V belts (MC50 and MC150) and also conveyor belts up to 200mm wide (MC100 and MC200).

The new generation of Mafdel welding tools benefit from features that optimize and further improve the joining process such as:

– Rapid heat up (2 minutes)
– Electronic regulation
– Temperature indication
– Ergonomically shaped
– High performance PTFE blade
– Thermally insulated
– Integrated stand

>> Consult the documentation for MC50 welding iron for thermoweldable extruded belts.
>> Consult the documentation for MC100 – MC200 welding irons for thermoweldable conveyor belts.
>> Consult the documentation for MC150 welding iron for overlap joining of extruded belts.


POLYBELT+

Nova correia trapezoidal termosoldável bimaterial, reforçada com cabos de aramida.
A correia Polybelt+ respeita as normas alimentares mais estritas e apresenta características óptimas para a tração tangencial de rolos e a transferência de carga.
Muito resistente à abrasão e ao corte, a correia Polybelt+ apresenta uma grande flexibilidade de enrolamento e uma elevada capacidade de carga.
Disponível com uma base trapezoidal dentada em poliuretano 85 ou 95 ShA, é igualmente de junção muito fácil com a nossa ferramenta de soldadura overlap.

>> Consultar a documentação


Esteira de tração positiva POSITIVEBELT reforçada para a tração de rolos.

A esteira de tração positiva POSITIVEBELT reforçada com cabos de aramida apresenta características óptimas para a tração de rolos.

Oferece uma capacidade de carga importante e uma boa aderência eliminando ao mesmo tempo os riscos de patinagem.

>> Consultar a documentação


Esteira de tração positiva POSIVEBELT de elastómero de poliéster.

A esteira POSITIVEBELT fabricada em elastómero de poliéster apresenta uma excelente resistência em tração.

Pode ser utilizada em grandes entre-eixos e suportar cargas médias a pesadas.
O seu fraco coeficiente de fricção permite, em certos casos, efetuar a acumulação de produtos.

A esteira POSITIVEBELT em elastómero de poliéster apresenta igualmente uma boa resistência às variações de temperaturas.